The Omni Eye Explosion Proof Video Inspection Camera contains all solid state circuitry

An automatic on screen over voltage protection indicator is provided to inform the operator if at any time the voltage is excessive at the camera. A color bar generator located within the camera allows the operator to check or adjust the color hue and intensity from the viewing station. Lamp intensity, lens focus, iris aperture, camera head rotation and swing can be remotely controlled and adjustable from the viewing station.

The camera is designed to withstand the rigorous environment of sanitary sewers and storm drains. It is designed to withstand the shocks and vibrations normally sustained while traveling through a perforated pipeline. It has an operating temperature range of zero to 50° Centigrade, and is sealed to withstand external pressures of up to 50 psi without leakage.

The Omni Eye Explosion Proof Camera can be transported through pipelines either on skids or mounted on an optional Explosion Proof Tractor Transport Vehicle.

A self sealing pressure test port is provided at the camera back for checking the leak resistance of the camera.

ENVIRONMENTAL RATING Reference: IEC529 IPX7 Protected against the effects of immersion
 
RATING Reference: NFPA 70 NEC Class I, Division 1, Groups C & D locations T3A (maximum temperature 180° C). Operating temperature range: 0° C to 40° C Not rated for acidic atmospheres
 
PHYSICAL DESCRIPTION Overall camera length is 19-inches (excluding interconnect cables) Camera body diameter is 3-1/2-inches Camera body length is 13.6-inches Camera housing is fabricated from 6061-T6 aluminum and stainless steel Camera housing finish is black hard anodized per MIL-A-08625D Type III, Class 2
 
PAN & TILT CAMERA HEAD Head Height: 4-5/8-inches Directional camera head is capable of 330° axial rotation and 270° lateral swing or any combination of the two, enabling the 360° viewing of lateral pipelines perpendicular to the direction of the camera travel A gear train and two precision DC motors mechanically drive the rotational head All drive components are sealed to protect them from water and grit
 
IMAGE SENSOR 1/2-inch diagonal solid state CCD Pixels: 768H X 494V Total Pixels: 379,000 Minimum sensor sensitivity at faceplate is 0.5 lux
 
MINIMUM ILLUMINATION 3-lux to produce a NTSC (National Television System Committee) color video picture in 6-inch to 24-inch pipelines
 
RESOLUTION 460 TV Lines, Horizontal
 
VIDEO OUTPUT 460 TV Lines, Horizontal 1-volt signal at the monitor after transmission through up to 2,500-feet of double armored single conductor cable
 
SIGNAL TO NOISE RATIO > 46dB
 
INPUT VOLTAGE RANGE Nominal 120VDC (80VDC to 140VDC)
 
INPUT VOLTAGE RATING 120VDC 0.8Amps
 
LENS 6mm F/1.4 that provides a 70° field of view Camera lens is sealed into the head of the camera and is protected from the environment by a distortion free optical sapphire window
Lens is separated from the light windows to prevent reflected lamplight from entering the lens
 
INTEGRATED LIGHTS Two 25 -Watt 14-Volt halogen lamps are sealed into the head of the camera Power Consumption: 50-Watts maximum Illumination: 104 mscp (1319 lumens) Lamp Life: 200 hours Color Temperature: 2200°K to 3000°K Power is derived from a power supply located inside the camera A distortion free optical sapphire window protects both Lamps are field replaceable
 
LAMP & CAMERA POWER Camera power, control signal, and video signal are passed through a double armored, single conductor cable that is wired into a specially designed connector configuration. Power to the camera is regulated by the Omni Eye Explosion Proof Camera's internal power supply Camera's power supply limits the lighting power regardless of the voltage setting at the controller
 
COMPATIBLE CONTROLLERS R.S.T. Mainline Controller R.S.T. 1300 Series Controller R.S.T. Auxiliary Controller R.S.T. Hand Held Controller